Hanging With Artsake.
Your Step-By-Step Guide To Hanging Art With Our “No Wire” Hanging System
You received your art and now you’re ready to get it up on your wall. Thanks to our clever hanging kit, you get to skip that “leave it leaning against the wall for a few months” situation that many people go through. The sooner you get to hang your art, the sooner the compliments will start to roll in.
Not in the mood to read? Watch the "How To Hang" video instead.
Not in the mood to read? Watch the "How To Hang" video instead.
Artwork shown: Once Upon A Time At Chateau Marmont
BEFORE YOU GET STARTED
Let’s unpack what you get & what you’ll need
Attached to the back of your art, you’ll find our easy-to-use hanging kit with: 1 level, 1 strip of tape, 2 markers, 2 nails and 1 bumper. The only things you need? A hammer and a phillips head screwdriver.
What’s included in our “no wire” hanging kit
HANGING TIP
Hang art like you'd hang a mirror — at eye level, typically around 57 to 60 inches from the floor to the center of the artwork.
When hanging art above furniture, such as a sofa or a console table, the bottom of the artwork should generally be 6-12 inches above the furniture.
When hanging art above furniture, such as a sofa or a console table, the bottom of the artwork should generally be 6-12 inches above the furniture.
STEP
1
1
Mark your wall
Slide one of the markers up into the left bracket, found on the back of your frame.
Once you’ve determined the perfect place to mount your art, press the frame firmly into the wall to create your left dimple mark.
Once you’ve determined the perfect place to mount your art, press the frame firmly into the wall to create your left dimple mark.
STEP
2
2
Nail the marker into your wall
Remove the left marker from the bracket and insert a nail through the marker.
Hammer the nail & marker into the dimple on the wall.
Hammer the nail & marker into the dimple on the wall.
STEP
3
3
Make sure your frame is level
Affix the strip of foam tape and level to the top of your frame.
Attach the bumper to the back of your frame at the bottom.
This will protect your wall.Insert the second marker into the right bracket.
Slide the left bracket down onto the marker already nailed to the wall.
Adjust the right side of the frame until level.
Attach the bumper to the back of your frame at the bottom.
This will protect your wall.Insert the second marker into the right bracket.
Slide the left bracket down onto the marker already nailed to the wall.
Adjust the right side of the frame until level.
STEP
4
4
Mark your wall (again)
Once the frame is level, press the right side of the frame firmly into the wall to make your right dimple mark.
Repeat step #2 on the right side, remove the marker from the bracket and nail it into the wall.
Repeat step #2 on the right side, remove the marker from the bracket and nail it into the wall.
STEP
5
5
Hang your art
Hook both brackets onto each of the markers that are nailed into your wall.
Pull down to lock your art into place.
Remove the foam tape and level from your frame to complete the installation.
Pull down to lock your art into place.
Remove the foam tape and level from your frame to complete the installation.
STEP
6
6
Now admire
Take a step back and admire the new addition to your home.
Artwork shown: Black Bands
SEE HOW IT’S DONE
Watch the video now
